| No. | Brand | B | A | L | h | U | C | T | F |
| INS-IP-311L | DODGE | 20.60 mm | - | - | - | - | - | - | - |
| FB-DL-104 | DODGE | - | - | 349.25 mm | - | - | - | - | - |
| P2B-DI-211R | DODGE | - | - | - | - | - | - | - | - |
| P2B-VSC-104-NL | DODGE | - | - | - | - | 10 mm | - | - | - |
| F4S-S2-203R | DODGE | 300 mm | - | - | - | - | - | - | - |
| F4B-SC-103-NL | DODGE | - | - | - | - | - | - | - | - |
| WSTU-GT-203 | DODGE | - | - | - | - | - | - | - | - |
| SFCN-IP-200RE | DODGE | 33.30 mm | - | - | - | - | - | - | - |
| SEP2B-S2-211R | DODGE | 55.60 mm | - | - | - | - | - | - | - |
| TB-GT-45M | DODGE | - | - | - | - | - | - | - | - |
| INS-VSC-30M | DODGE | - | - | - | - | - | - | - | - |
| F2B-SC-104-FF | DODGE | - | - | - | 38.1 mm | - | - | - | - |
| F2B-DL-104-NL | DODGE | - | - | - | - | - | 18 mm | - | - |
| WSTU-SXR-102 | DODGE | 26.441 mm | - | - | - | - | - | - | - |
| 5064 | DODGE | 34.00 mm | - | - | - | - | - | - | - |
| P2B-LTB7-203 | DODGE | - | - | - | - | - | - | - | - |
| 69973 | DODGE | - | - | - | 38.1 mm | - | - | - | - |
| P2B-HC-107 | DODGE | - | - | - | - | - | - | - | - |
| EP4B-IP-507LE | DODGE | 57.15 mm | - | - | - | - | - | - | - |
| P2B-VSC-008 | DODGE | - | - | - | - | - | - | - | - |
| SP4B517-SAFS-300TT | DODGE | - | - | - | - | - | - | - | - |
| DODGE P2B-LTB7-203 Mounted Units & Inserts | Mass:2.2 kg; Maximum tractor speed max.:90 km/h; Sealing system:SKF Mudblock seal; Basic dynamic load rating C:47.5 kN; Recommended minimum temperature min.:-20 °C; Recommended lower temperature limit for storage (static):-50 °C; GF:M12x1.25; Minimum rotational disc speed min.:90 r/min; J:98 mm; Recommended tractor speed:72 km/h; |
| 5 Inch | 127 Millimeter x 5.984 Inch | 152 Millimeter x 5.5 Inch | 139.7 Millimeter DODGE P4B-IP-500RE Pillow Block Bearings | D:400 mm; r1s (min):4 mm; F:296 mm; E:mm; d2 (max):mm; rs (min):4 mm; B:65 mm; Dynamic (Ca):643 kN; b:mm; b1:mm; Size (mm):5 Inch | 127 Millimeter x 5.984 Inch | 152 Millimeter x 5.5 Inch | 139.7 Millimeter ; |
| DODGE F2B-GTM-111 Flange Block Bearings | Oil Speed Rating Open/Shielded n2:7500 rpm; D:110.0000 mm; B:27.00 mm; Accessories:Without Accessories; d:50.000 mm; Grease Speed Rating Open/Shielded n1:6300 rpm; Basic Dynamic Radial Load Rating C:61800 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:38000 N; Oil Speed Rating n2:7500 rpm; |
| DODGE F4S-S2-203R Flange Block Bearings | Reference speed:480 r/min; r1,2 min.:7.5 mm; B:300 mm; ra max.:6 mm; Misalignment factor k1:0; Da min.:638 mm; Fatigue load limit Pu:1020 kN; Limiting speed:630 r/min; D1 ≈:671 mm; d:460 mm; |
| DODGE TP-K-315R Take Up Unit Bearings | Max. speed for Taconite seal:950 r/min; P90°:84.5 kN; A1:98.425 mm; da:77.787 mm; Cap bolt:1/2-13 UNC; Da:160 mm; H2:41.275 mm; A2:206.375 mm; Stabilizing ring:SR-18-15; P150°:48 kN; |
| 2.688 Inch | 68.275 Millimeter x 3.594 Inch | 91.288 Millimeter x 3.25 Inch | 82.55 Millimeter DODGE P4B-S2-211R Pillow Block Bearings | B1:110.185 mm; G:109.855 mm; Mass adapter sleeve assembly:3.02 kg; d1:93.662 mm; d:110 mm; Sleeve:S 122x3.11/16; Threads per inch:12; B4:93.802 mm; Lock washer:W 22; d3 max.:145.39 mm; Size (mm):2.688 Inch | 68.275 Millimeter x 3.594 Inch | 91.288 Millimeter x 3.25 Inch | 82.55 Millimeter ; |
| 2.688 Inch | 68.275 Millimeter x 6.5 Inch | 165.1 Millimeter x 4.75 Inch | 120.65 Millimeter DODGE P2B-C-211 Pillow Block Bearings | Eye bolt, size:2 x M 42; J:950 mm; Oil level, max.:111 mm; da:380 mm; Locating ring:2 x FRB 10/650; H:755 mm; P180°:3500 kN; Appropriate attachment bolt, rec. tightening torque:3640 N·m; Appropriate attachment bolt, size G:42 mm; P120°:3100 kN; Size (mm):2.688 Inch | 68.275 Millimeter x 6.5 Inch | 165.1 Millimeter x 4.75 Inch | 120.65 Millimeter ; |
| 2.688 Inch | 68.275 Millimeter x 3.59 Inch | 91.186 Millimeter x 3.125 Inch | 79.38 Millimeter DODGE SEP2B-S2-211R Pillow Block Bearings | Basic Static Radial Load Rating Co:146000 N; D:170.0000 mm; Basic Dynamic Radial Load Rating C:159000 N; Sealed Speed Rating n3:2200 rpm; d:95.000 mm; B:55.60 mm; Accessories:Shield & Seal; Grease Speed Rating n1:2200 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3200 rpm; Size (mm):2.688 Inch | 68.275 Millimeter x 3.59 Inch | 91.186 Millimeter x 3.125 Inch | 79.38 Millimeter ; |
| 6 Inch | 152.4 Millimeter x 7.078 Inch | 179.781 Millimeter x 7.063 Inch | 179.4 Millimeter DODGE P4B534-ISAF-600L Pillow Block Bearings | s1 max.:23.3 mm; Da min.:426 mm; Limiting speed:1400 r/min; Basic static load rating C0:4000 kN; d2 ≈:375 mm; Ca min.:1.8 mm; D:480 mm; D1 ≈:441 mm; B:121 mm; Mass bearing:75.5 kg; Size (mm):6 Inch | 152.4 Millimeter x 7.078 Inch | 179.781 Millimeter x 7.063 Inch | 179.4 Millimeter ; |
| DODGE TP-GT-18 Mounted Units & Inserts | d5:119 mm; Recommended tightening torque:14.2 N·m; B:32 mm; Mass:1.2 kg; G:M 90x2; Grub (set) / Locking screw size:M 6; d3:120 mm; h:4 mm; d1:115 mm; Associated spanner (Hook spanner in accordance with DIN 1810):HN 18-20; |
| DODGE F4B-DL-115 Flange Block Bearings | Da max.:91.5 mm; Calculation factor e:0.35; da max.:65 mm; Calculation factor Y0:0.9; d:57.15 mm; B:21.946 mm; Reference speed:5600 r/min; C:17.826 mm; Mass bearing:0.64 kg; a:17.384 mm; |
| 2 Inch | 50.8 Millimeter x 1.906 Inch | 48.42 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE P2B-UN2-200E Pillow Block Bearings | ra max.:1.5 mm; da max.:84.5 mm; Da max.:121 mm; Basic dynamic load rating C:217 kN; K:3 mm; d1:65 mm; r1,2 min.:1.5 mm; Ba min.:3 mm; b:6 mm; Fatigue load limit Pu:26.5 kN; Size (mm):2 Inch | 50.8 Millimeter x 1.906 Inch | 48.42 Millimeter x 2.25 Inch | 57.15 Millimeter ; |
| DODGE WSTU-S2-112RE Take Up Unit Bearings | Sealed Speed Rating n3:2600 rpm; Basic Static Radial Load Rating Co:208000 N; D:160.0000 mm; d:75.000 mm; Grease Speed Rating n1:2600 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:187000 N; B:71.40 mm; Accessories:Two Shields & Snap-R; Oil Speed Rating n2:3600 rpm; |
| DODGE INS-IP-108R Insert Bearings Spherical OD | B:10.5 mm; d:65 mm; r1,2 min.:1.1 mm; d1:115 mm; Mass shaft washer:0.56 kg; |
DODGE LFT-SXV-107 Flange Block Bearings Video