| AMI UC206-20 Insert Bearings Spherical OD | PG:1/4 NPT; Ca:55.804 mm; L:387.35 mm; R2:30.163 mm; Stabilizing ring:2 x 38151-24; da:107.95 mm; H1:114.3 mm; Bearing:23024 CCK/W33; ba:46.831 mm; Max. speed for Taconite seal:725 r/min; |
| AMI UCFS316 Flange Block Bearings | L:700 mm; Oil level, min.:64 mm; Q150°:1650 kN; P180°:1700 kN; Cap bolt, rec. tightening torque:400 N·m; Locating ring:2 x FRB 10/400; Appropriate attachment bolt, rec. tightening torque:1310 N·m; End cover:ETS 3148 R; A1:260 mm; Bearing (basic designation):C 3148 K; |
| AMI UGPU312 Pillow Block Bearings | Frame Size B:24 in; Frame Size A:4 41/64 in; Length H:0.500 in; Height G:3.438 in; Bolt Pattern E:22 1/2 in; Shaft C/L Distance F:1 27/32 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Bolt Pattern C:0.55 in; Bolt Pattern D:2 3/4 in; Travel:18; |
| AMI UCNST211-32TC Mounted Units & Inserts | Hydraulic nut:HMVC 15E; Mass adapter sleeve assembly:1.35 kg; B:15.342 mm; Threads per inch:12; B1:78.08 mm; Sleeve:S 115x2.3/8; d:75 mm; d1:60.325 mm; G:74.498 mm; Lock washer:W 15; |
| AMI MUCNTPL206-19RFCW Mounted Units & Inserts | Housing:SAFS 530; J min.:431.8 mm; Labyrinth ring:2 x LOR 127; Max. speed for PosiTrac Plus seal:1075 r/min; Appropriate attachment bolt size G:1 in; da:134.938 mm; Ca:82.804 mm; R2:39.688 mm; P150°:136 kN; L:539.75 mm; |
| AMI SER207-20FS Insert Bearings Cylindrical OD | Fw:35 mm; Mass needle roller and cage assembly:0.021 kg; Limiting speed:13000 r/min; Basic dynamic load rating C:19.8 kN; Fatigue load limit Pu:4.65 kN; Ew:40 mm; U:17 mm; Basic static load rating C0:39 kN; Reference speed:12000 r/min; |
| AMI UCMFL204-12MZ2 Flange Block Bearings | R1:87.313 mm; h:51.594 mm; da:140 mm; P180°:127 kN; Pa:82.3 kN; Bearing:22228 CC/W33; Cap bolt, SAE grade:8; PG:1/4 NPT; Housing:SSAFS 228; Labyrinth ring (db shaft position):LOR 144; |
| AMI BPF6-20 Flange Block Bearings | Limiting speed:5600 r/min; Calculation factor Y2:4.6; d2 ≈:101 mm; B1:52 mm; Basic static load rating C0:325 kN; G:M 95x2; G1:9 mm; ra max.:2 mm; Calculation factor Y1:3; Fatigue load limit Pu:34.5 kN; |
| AMI UCF207-22NPMZ20RF Mounted Units & Inserts | Basic Dynamic Radial Load Rating C:123000 N; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:3100 rpm; B:32.00 mm; Fillet Radius ra:2.00 mm; d:120.000 mm; D:190.0000 mm; Grease Speed Rating Open/Shielded n1:2500 rpm; Basic Static Radial Load Rating Co:146000 N; |
| AMI UEF212-39 Flange Block Bearings | Basic dynamic load rating C:465 kN; α:6 °; l4 max.:284 mm; Material constant KM:330; l7 min.:80 mm; h1:200 mm; G:M 56x4; C1 max.:43 mm; Basic static load rating C0:530 kN; l3 min.:80 mm; |
| AMI MUCTBL206-18W Pillow Block Bearings | r1,2 min.:3.3 mm; d1 ≈:393 mm; r3,4 min.:3.3 mm; Design variant/feature:TDI/GWIY2; Comparative axial load rating CFa:202 kN; d:342.9 mm; Thrust factor K:1.76; Calculation factor e:0.33; Calculation factor Y0:2; Fatigue load limit Pu:365 kN; |
| AMI PAV206-20 Mounted Units & Inserts | Calculation factor Y1:1.5; d:65 mm; ra max.:1.5 mm; Ca min.:4 mm; Calculation factor Y0:1.4; da max.:73 mm; Da min.:90 mm; b:7 mm; K:4.5 mm; r5 min.:0.6 mm; |
| AMI KHLLP202-10 Pillow Block Bearings | P180°:92.5 kN; PG:1/4 NPT; Da:309.999 mm; L:628.65 mm; P60°:234 kN; RG:3/4 NPT; h:54.769 mm; ba:88.106 mm; R2:37.306 mm; da:170 mm; |
| AMI MBFPL5-16B Flange Block Bearings | db:470 mm; Cap bolt, size:M 36x240; J:950 mm; Eye bolt, size:2 x M 42; P180°:3500 kN; P120°:3100 kN; Bearing (basic designation):24088; Locating ring:2 x FRB 10/650; ATK:560 mm; Q120°:4200 kN; |