| AMI MUCST207-23NP Take Up Unit Bearings | Limiting speed:700 r/min; ra max.:2.5 mm; K:5 mm; Calculation factor kr:0.25; D1 ≈:419 mm; b1:9.4 mm; Fatigue load limit Pu:390 kN; r1,2 min.:3 mm; Reference speed:560 r/min; Basic dynamic load rating C:1790 kN; |
| AMI UKFL312+HS2312 Mounted Units & Inserts | L:628.65 mm; Pa:43.6 kN; Cap bolt, SAE grade:5; J max.:549.275 mm; RG:3/4 NPT; End plug (suffix Y):EPR 18; Appropriate attachment bolt size G:1 in; da:152.4 mm; S:4.763 mm; Bearing limiting speed:2600 r/min; |
| AMI UKFCSX10+HE2310 Mounted Units & Inserts | d:28.600 mm; Sealed Speed Rating n3:7900 rpm; Basic Static Radial Load Rating Co:7500 N; Grease Speed Rating Open/Shielded n1:11000 rpm; Basic Dynamic Radial Load Rating C:12500 N; Shielded or Sealed B1:12.7 mm; Oil Speed Rating Open/Shielded n2:14000 rpm; Accessories:One Seal; Width Plain B:9.5 mm; D:54.0000 mm; |
| AMI UCNST211-32TC Mounted Units & Inserts | Hydraulic nut:HMVC 15E; Mass adapter sleeve assembly:1.35 kg; B:15.342 mm; Threads per inch:12; B1:78.08 mm; Sleeve:S 115x2.3/8; d:75 mm; d1:60.325 mm; G:74.498 mm; Lock washer:W 15; |
| AMI UCWTPL205-14MZ2B Mounted Units & Inserts | A1:90 mm; Appropriate attachment bolt, size G:20 mm; Q150°:125 kN; P150°:175 kN; Cap bolt, size:M 12x70; Pa:140 kN; P90°:260 kN; J:260 mm; da:70 mm; Oil seal:2 x TSN 516 U; |
| AMI MUCTBL209-28W Pillow Block Bearings | Basic Dynamic Radial Load Rating C:475000 N; Grease Speed Rating n1:1400 rpm; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:1800 rpm; B:72.00 mm; Fillet Radius rb:1.00 mm; D:440.0000 mm; d:240.000 mm; Basic Static Radial Load Rating Co:750000 N; |
| AMI UCEP208-24 Pillow Block Bearings | Basic Static Radial Load Rating Co:140000 N; Fillet Radius ra:2.50 mm; Sealed Speed Rating n3:2100 rpm; d:100.000 mm; B:47.00 mm; D:215.0000 mm; Accessories:Two Seals; Grease Speed Rating Open/Shielded n1:3000 rpm; Oil Speed Rating Open/Shielded n2:3600 rpm; Basic Dynamic Radial Load Rating C:174000 N; |
| AMI MUCECH203TC Hanger Unit Bearings | Bearing (basic designation):C 3176 K; J:870 mm; N4 max.:30 mm; A2:395 mm; J1:220 mm; A1:360 mm; s:30 mm; N:50 mm; da:360 mm; Ca:214 mm; |
| AMI UCFA202-10TC Mounted Units & Inserts | Oil seal:2 x TSD 3148 U; Da:400 mm; P180°:1700 kN; P150°:1400 kN; H2:95 mm; Q180°:1430 kN; Bearing (basic designation):23148 K; J1:150 mm; P0°:3400 kN; Oil level, max.:79 mm; |
| AMI UCTBL201-8MZ2RFCEW Mounted Units & Inserts | Basic Static Radial Load Rating Co:290000 N; d:220.000 mm; Sealed Speed Rating n3:1100 rpm; Grease Speed Rating Open/Shielded n1:1800 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:2200 rpm; Accessories:Two Seals; Basic Dynamic Radial Load Rating C:247000 N; B:56.00 mm; D:340.0000 mm; |
| AMI UCECH214 Hanger Unit Bearings | Oil Speed Rating n2:18000 rpm; d:20.000 mm; Basic Static Radial Load Rating Co:3400 N; D:47.0000 mm; Grease Speed Rating n1:15000 rpm; Basic Dynamic Radial Load Rating C:12700 N; Fillet Radius ra:1.00 mm; B:14.00 mm; |
| AMI UCP210-30TCMZ2 Pillow Block Bearings | H1:125.425 mm; A2:234.95 mm; P180°:60.9 kN; J max.:368.3 mm; A1:120.65 mm; End plug (suffix Y):EPR 15; da:114.3 mm; Cap bolt:2 x 3/4-10 UNC; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| AMI UCPA205-16 Pillow Block Bearings | Mass adapter sleeve assembly:134 kg; B4:75 mm; A:6.5 mm; G:Tr 460x5; Hydraulic nut:HMV 92E; B1:382 mm; G3:12 mm; B5:95 mm; Lock nut:HM 3192; G2:M 8; |
| AMI KHFL206-19 Mounted Units & Inserts | da min.:43.2 mm; Attainable speed for grease lubrication:22000 r/min; Calculation factor e:0.68; Calculation factor f2B:1.07; Da max.:58.8 mm; Calculation factor f2D:1.17; Static axial stiffness, preload class C:167 N/µm; Basic static load rating C0:8 kN; Calculation factor (back-to-back, face-to-face) Y2:1.41; r1,2 min.:0.6 mm; |