| AMI UCHPL207W Hanger Unit Bearings | R1:130.175 mm; Cap bolt, SAE grade:8; Adapter sleeve assembly:SNW 44x7.15/16; Housing:SSAFS 544; End plug (suffix Y):EPR 23; Ca:117.805 mm; R2:46.831 mm; ba:90.487 mm; Initial grease fill:2749.95 g; Bearing limiting speed:2000 r/min; |
| AMI MUCECH203TC Hanger Unit Bearings | Bearing (basic designation):C 3176 K; J:870 mm; N4 max.:30 mm; A2:395 mm; J1:220 mm; A1:360 mm; s:30 mm; N:50 mm; da:360 mm; Ca:214 mm; |
| AMI UETB206-18 Pillow Block Bearings | d:1000 mm; Nut for removal:HM 31/1060; Mass withdrawal sleeve:608 kg; B1:630 mm; G2:G 1/4; B2:652 mm; d1:950 mm; Hydraulic nut:HMV 212 E; A:15 mm; G:Tr 1060x8; |
| AMI CUCF213C Flange Block Bearings | Dimension J:0.3125 in; Dimension H:1.0000 in; Insert Bearing IB:ZMaRC; Shaft Diameter D:1 7/16 in; Dimension N:0.7813 in; Basic Dynamic Radial Load Rating:5730 lbf; Pin Dia A1:0.2500 in; Dimension D2:2.6875 in; Dimension S1:1.0000 in; Dimension L:4.5000 in; |
| AMI UCFL207-22C Flange Block Bearings | R2:41.275 mm; Adapter sleeve assembly:SNW 36x6.7/16; Mass pillow block:197 kg; Cap bolt, SAE grade:8; A2:254 mm; Ca:95.809 mm; P180°:202 kN; da:163.512 mm; Housing:SSAFS 536; Eye bolt:2 x 3/8-16 UNC; |
| AMI MUCFPL204-12CW Flange Block Bearings | Fatigue load limit Pu:0.005 kN; Basic static load rating C0:0.114 kN; Calculation factor f0:6.5; Limiting speed:63000 r/min; da max.:4.5 mm; d:3.175 mm; C:0.762 mm; da min.:4.5 mm; ra max.:0.3 mm; Reference speed:130000 r/min; |
| AMI UCWTPL205-14CEW Mounted Units & Inserts | Cap bolt, rec. tightening torque:600 N·m; H1:340 mm; Q180°:2100 kN; A:395 mm; P90°:3600 kN; Oil seal:TSD 3168 U; bb:167 mm; P0°:6000 kN; Adapter sleeve:OH 3168 H; P120°:2600 kN; |
| AMI UCFT206-19 Flange Block Bearings | Fatigue load limit Pu:9.8 kN; B1:46 mm; Calculation factor e:0.28; B2:13 mm; B:28 mm; d2 ≈:47.2 mm; Ba min.:8 mm; Da max.:73 mm; d1:35 mm; b:6 mm; |
| AMI UKP313+HE2313 Pillow Block Bearings | Mass rod end:3.2 kg; l3 min.:65 mm; dk:60 mm; d2 max.:104 mm; Basic dynamic load rating C:127 kN; Material constant KM:330; C1 max.:28 mm; h1:165 mm; G:M 45x3; d:45 mm; |
| AMI UCTB207-23NP Mounted Units & Inserts | Stabilizing ring:SR-36-30; J max.:600.075 mm; P120°:84.5 kN; da:131.762 mm; Bearing:22330 CCK/W33; P180°:89 kN; H:377.825 mm; N1:28.575 mm; h:66.675 mm; Eye bolt:2 x 3/8-16 UNC; |
| AMI UCF207-22NPMZ20RF Mounted Units & Inserts | Basic Dynamic Radial Load Rating C:123000 N; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:3100 rpm; B:32.00 mm; Fillet Radius ra:2.00 mm; d:120.000 mm; D:190.0000 mm; Grease Speed Rating Open/Shielded n1:2500 rpm; Basic Static Radial Load Rating Co:146000 N; |
| AMI UCF207-23NPMZ2 Flange Block Bearings | db max.:41.1 mm; Static axial stiffness, preload class D:183 N/µm; a:15.6 mm; Ball diameter Dw:5.556 mm; Calculation factor f2D:1.14; r3,4 min.:0.3 mm; Attainable speed for grease lubrication:22000 r/min; da min.:38.2 mm; db min.:38.2 mm; Calculation factor f2B:1.04; |
| AMI MUCLP207NP Mounted Units & Inserts | D:900 mm; B:410 mm; r3,4 min.:6 mm; Calculation factor e:0.35; d:710 mm; T:410 mm; Comparative radial load rating CF:2360 kN; r1,2 min.:3 mm; Thrust factor K:1.66; d1 ≈:750 mm; |
| AMI UCSP206-20 Pillow Block Bearings | Reference speed:4500 r/min; 2B:54 mm; Limiting speed:7000 r/min; da max.:64 mm; Ca min.:5 mm; rc max.:0.6 mm; Da min.:81 mm; Basic dynamic load rating C:191 kN; r3,4 min.:1.5 mm; d:55 mm; |