| No. | Brand | J | E | D | B | a | Z | A | H |
| 6217-NR-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ307-E-M1 | FAG | - | - | - | - | - | - | - | - |
| 61907 | FAG | - | - | - | - | - | - | - | - |
| 23172-K-MB-C3 | FAG | - | - | - | - | - | - | - | - |
| 61864-M | FAG | - | - | - | - | - | - | - | - |
| 23028-E1A-K-M | FAG | - | - | - | - | - | - | 40 mm | - |
| 2203HDL O-9 P2P 00481 | FAG | - | - | - | - | - | - | - | - |
| 16024-C3 | FAG | - | - | - | - | - | - | - | - |
| 20209-K-TVP-C3 | FAG | - | - | 47 mm | 9 mm | - | - | - | - |
| HS7012-C-T-P4S-DUL | FAG | - | - | - | - | - | - | - | - |
| NJ419-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ318-E-M1 | FAG | - | - | - | - | - | - | - | - |
| B7036-C-T-P4S-UL | FAG | - | - | - | - | - | - | - | - |
| 6248-M | FAG | - | - | - | - | - | - | - | - |
| 16010-C3 | FAG | - | - | - | - | - | - | - | - |
| 6306-M-P52 | FAG | - | - | - | - | - | - | - | - |
| NU317-E-TVP2-C3 | FAG | - | - | - | - | - | 26.8 mm | 66 mm | 63.5 mm |
| 1313-K-TVH-C3 | FAG | - | - | - | 21.4 mm | - | - | - | - |
| 7320-B-MP-UA | FAG | - | - | - | - | - | - | - | - |
| QJ313-MPA-T42A | FAG | - | - | - | - | - | - | - | - |
| 6202-C-HRS | FAG | - | - | 90 | 36 | - | - | - | - |
| 6220-2Z-NR | FAG | - | - | 520 | - | - | - | - | - |
| 110 mm x 240 mm x 50 mm FAG 6322 Single Row Ball Bearings | da - Cone Frontface Backing Diameter:3.99 in; Cup Part Number:752A; Cage Type:Stamped Steel; Cone Part Number:767D; G1 - Heat Generation Factor (Roller-Raceway)11:177; Cg - Geometry Factor12:0.0945; Db - Cup Backface Backing Diameter:5.75 in; Aa - Cage-Cone Backface Clearance:0 in; Y1 - ISO Factor9:1.98; R - Cone Frontface To Clear Radius1:0.060 in; Size (mm):110 mm x 240 mm x 50 mm ; |
| FAG N330-E-M1-C3 Cylindrical Roller Bearings | Support Type:Round Flange; Dimension H:2.2 in; Dimension L:4.1 in; Shaft Size:1.75 in; Maximum Speed:4630 rpm; Dimension P:0.5 in; Note:This product line wa; Series Type:Light Series; Cor - Static Load Rating:19558 lbf; Bearing - Housing - Seal UPC:013992093370; |
| FAG B7006-E-T-P4S-UM Precision Ball Bearings | Width B:510.000 mm; Chamfer r1smin2:15.0 mm; Type:RX-1; Lubrication Hole Diameter h:12.0 mm; Weight:1389.700 lb; DUR/DOR F/E:600.000 mm; Inner-Ring Set:550ARXS2484; Backing Shaft Diameter ds:588.5 mm; Outer-Ring Set:600RXS2484; Angle of Chamfer r1smin:20º; |
| FAG 6308-2Z-HT1 Single Row Ball Bearings | C1(2) - Dynamic Radial Rating (Two-Rows):140000 N; Y1 - ISO Factor5:4.4; Superseded Part:22211KCJW841C3; Reference Thermal Speed Rating (Grease):4700; Y2 - ISO Factor6:2.89; Reference Thermal Speed Rating (Oil)7:5800; B - Outer Ring Width:25 mm; Da - Outer Ring Backing Diameter:91.000 mm; r - Outer Ring To Clear Radius2:1.5 mm; D:100 mm; |
| FAG 7312-B-TP-UO Angular Contact Ball Bearings | O.D. D(φ):16; Days to Ship:7 Days; Application:For Inner Ring; L(mm):1 ～ 100; L Dimension Tolerance:Negative Tolerance; I.D. d(φ):12; RoHS:6; Material:5052 Aluminum Alloy; |
| FAG 1902HDL Precision Ball Bearings | H:102 mm; Recommended tightening torque for set screw:5.5 Nm; S:12.7 mm; L:60 mm; C:12.8 kN; d:12 mm; C0:6.65 kN; Designation of housing:FA204-; Weight:0.51 kg; N:10mm; |
| FAG 24168-B-C3 Spherical Roller Bearings | D:9.2510 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:63800 lbf; Cage Type:Stamped Steel; B - Double Cone Width:6.0000 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; d:4.7500 in; e - ISO Factor8:0.37; Y2 - ISO Factor10:2.72; Aa - Cage-Cone Backface Clearance:0 in; Series:95000; |
| FAG 6318-M-P53 Precision Ball Bearings | Maximum Speed:1820 rpm; Dimension P:1.0 in; Tensioning Unit Type:Tension Type; Bearing - Housing - Seal:MSE404BRHKPS; Bearing UPC:013992032515; Dimension T:20.0 in; Ca - Axial Load Rating:7014 lbf; Dimension N:16.5 in; Dimension W:1.7 in; Note:This product line wa; |
| FAG 3205-BD-2HRS-TVH-C2 Angular Contact Ball Bearings | L:84 mm; C:14 kN; A:38 mm; L1:27 mm; B:34.8 mm; H1:12 mm; G:M6x1; d1:37.4 mm; Weight:0.75 kg; A1:23 mm; |
| FAG B71902-C-T-P4S-DUM Precision Ball Bearings | Axial rigidity:132.4 N/µm; Characteristic inner ring frequency, BPFI:15.28 Hz; Preload value:0.41 kN; Preload level:GN; D6:135.4 mm; r1a max:0.6 mm; Da max:158 mm; r1s min:0.6 mm; Min operating temperature, Tmin:-20 °C; Mass:1.19 kg; |
| FAG 6207-TB-P52 Precision Ball Bearings | A:30 mm; B:22 mm; G:M6x1; L:55 mm; H1:14 mm; C:9.55 kN; Designation of housing:PG203-; J:38 mm; Designation of bearing:US202G2T20; H:30.2 mm; |
| 140 mm x 210 mm x 53 mm FAG 23028-E1A-K-M Spherical Roller Bearings | A1:13 mm; Weight:2.28 kg; C0:20.8 kN; T min.:-40 °C; Designation of open end cover:SCOU209-28; A:40 mm; T max.:100 °C; Designation of housing:FE209N-; L:137 mm; d:44.45 mm; Size (mm):140 mm x 210 mm x 53 mm ; |
| FAG B7003-C-2RSD-T-P4S-DUM Precision Ball Bearings | T min.:-40 °C; Dz:70 mm; Weight:1.16 kg; N:12mm; Designation of bearing:UC206-19G2T04; J:83 mm; S:15.9 mm; Z:44.2 mm; e:18 mm; A1:13 mm; |
| FAG B7205-C-T-P4S-DUL Precision Ball Bearings | Weight:6.1 kg; L:185 mm; Designation of housing:FS311-; G:M6x1; S:27.8 mm; A2:62.2 mm; T max.:100 °C; C:71.5 kN; d1:83 mm; A1:20 mm; |
FAG NU217-E-M1 Cylindrical Roller Bearings Video
FAG NU217E-M1 Cylindrical Roller Bearing, Single Row
Bore Diameter, 85. Brand Name, FAG Bearings. EAN, 4012801394857. Item Diameter, 150. Item Weight, 2.2. Model Number, NU217-E-M1. Number of Items, 1
NU217-E-M1-C3 - FAG Cylindrical Roller - Quality Bearings
This NU217-E-M1-C3 bearing is a single row cylindrical roller bearing, it has no flanges on the inner ring, an increased capacity design, a two piece solid brass
Fag Bearings Cylindrical BRG, Cage Guided, Bore ...
Order FAG BEARINGS Cylindrical BRG, Cage Guided, Bore 85 mm, NU217-E-M1-C3 at Zoro.com. Great prices & free shipping on orders over USD50!
FAG NU217-E-M1 CYLINDRICAL ROLLER BEARING
Part Number, NU217-E-M1. UPC, 743270452857. Bore Diameter, 3.34 inches inches. Brand Name, FAG. EAN, 0743270452857. Item Weight, 4.72 pounds
FAG (Schaeffler) - NU217-E-M1 - Motion Industries
Buy FAG (Schaeffler) Cylindrical Roller Bearings NU217-E-M1 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
NU 217 E M1-FAG - Nomo Bearings
High quality cylindrical roller bearing with machined brass cage from the leading manufacturer FAG, part of the Schaeffler group
NU217-E-M1 - FAG Cylindrical Roller - Quality Bearings
This NU217-E-M1 bearing is a single row cylindrical roller bearing, it has no flanges on the inner ring, an increased capacity design, a two-piece solid brass
FAG (Schaeffler) - NU217-E-M1-C3 - Motion Industries
Buy FAG (Schaeffler) Cylindrical Roller Bearings NU217-E-M1-C3 direct from Motion Industries. Your proven service leader with reliable delivery since 1972